Ringlock Scaffolding System
HS Roundlock is centred on the highly versatile all round connector, which features a "rosette" welded onto the standard component that can safely and securely accommodate eight individual connections.
Connections in this quick to assemble and spannerless scaffolding system make a unique combination : providing structural strength immediately on assembly and subsequent ultimate force transmission while offering a choice of automatically right-angled or splayed connections with unrivalled safety right from the start.
Main components of ringlock scaffolding
Scaffolding ringlock Standards are the vertical members of ringlok scaffolding.They provide the vertical support for scaffolding. Were made of high strength structural steel with hot dip galvanizing finish.The ringlock standard bears the loads from the scaffold down to the earth.
| Code |
Description |
Size |
Weight |
Standard |
| HSRS05 |
0.5M Standard |
500mm |
3.12KGS |
EN74/BS1139/AS1576 |
| HSRS10 |
1.0M Standard |
1000mm |
5.53KGS |
| HSRS20 |
2.0M Standard |
2000mm |
10.06KGS |
| HSRS30 |
3.0M Standard |
3000mm |
14.96KGS |
RinglockScaffolding Rosette
A Rosette is made of 9mm,9.5mm and 10mm steel. it contains 8 lasered openings into which a locking wedge or spigot fits. Scaffolding components such as diagonals, consoles, ... are clamped around the rosette each 45 degrees. The rosette thus allows very flexible 360° assembly.
Ledgers are the horizontal members of HS Roundlock scaffolding.They provide horizontal support for loads and planks.Ledgers can also be used as mid rail and top pr hand guard rails.Were made of high strength structural steel with hot dip galvanizing finish.
| Code |
Description |
P |
N |
Weight |
| HSRL65 |
0.65M Ledger |
650MM |
493MM |
3.14KGS |
| HSRL157 |
1.57M Ledger |
1570MM |
1413MM |
6.39KGS |
| HSRL213 |
2.13M Ledger |
2130MM |
1973MM |
8.96KGS |
| HSRL305 |
3.05M Ledger |
3050MM |
2893MM |
12.33KGS |
Ledger -O type
Ledgers are the horizontal members of ringlok scaffolding.They provide horizontal support for loads and planks.Ledgers can also be used as mid rail and top pr hand guard rails.Were made of high strength structural steel with hot dip galvanizing finish.
| |
Code |
Description |
P |
N |
Weight |
|
HSRL65 |
0.65M Ledger |
650MM |
493MM |
3.14KG |
| HSR1065 |
1.065M Ledger |
1065MM |
908MM |
4.59KG |
| HSR121 |
1.21M Ledger |
1210MM |
1053MM |
5.09KG |
| HSRL157 |
1.57M Ledger |
1570MM |
1413MM |
6.39KG |
| HSRL213 |
2.13M Ledger |
2130MM |
1973MM |
8.96KG |
| HSRL305 |
3.05M Ledger |
3050MM |
2893MM |
12.33KG |
Ledger -U type
| |
Code |
Description |
Weight |
|
HSRL039U |
0.39m Ledger - U transom |
2.10KG |
| HSRL045U |
0.45m Ledger - U transom |
2.33KG |
| HSRL073U |
0.73m Ledger - U transom |
3.41KG |
| HSRL1090U |
1.09m Ledger - U transom - reinforced |
6.98KG |
| HSRL1290U |
1.29m Ledger - U transom - reinforced |
7.90KG |
| HSRL1400U |
1.40m Ledger - U transom - reinforced |
8.70KG |
Brace
Bay braces are used for the lateral bracing HS Roundlock scaffolding.Bay braces can also be used as obtuse angle mid rail and top pr hand rails in conjunction with our stair system.Were made of high strength structural steel with hot dip galvanizing finish.
Ringlock Scaffold Diagonal Brace (48.3mmx 2.5mm)
| Code |
Description |
A |
B |
C |
Weight |
| HSCB15720 |
1.57M*2M Brace |
1570MM |
2450MM |
2488MM |
8.79KGS |
| HSCB21320 |
2.13M*2M Brace |
2130MM |
2811MM |
2849MM |
10.19KGS |
| HSCB30520 |
3.05M*2M Brace |
3050MM |
3519MM |
3557MM |
11.94KGS |
Base Collar
The base collar is designed to "base out" the HS Roundlock scaffold system sitting on top of the screw jack creating a lower node point,were made of high strength structural steel with hot dip galvanizing finish.
| Code |
Description |
Weight |
| HSRBC |
Base Collar |
1.57KGS |
Intermidiate Transom
Inter-transom are designed to create a transom at the deck level anywhere inside of the bay by stradding the outer ledgers/transoms of the bay. Were made of high strength structural steel with hot dip galvanizing finish.
| Code |
Description |
P |
N |
Weight |
| HSRMT157 |
1.57M Mid Transom |
1570MM |
1530MM |
7.05KGS |
| HSRMT213 |
2.13M Mid Transom |
2130MM |
2090MM |
8.76KGS |
HOP-UP BRACKET
Hop -Up Bracket are designed to increase the width of the working platform from five boards to seven or eight boards wide ,by supporting additional boards beyond the inside face of the scaffold .They incorporate a cup to locate an additioanl inside ledger ,which lincks adjacent hop-up brackets to prevent movement ,while also supporting intermediate transoms .There is also a location point for a handrail post if required.
| Code |
Description |
Overrall Length(M) |
Weight |
| HSCT36 |
2 Board |
0.585 |
6.3kgs |
| HSCT36 |
3 Board |
0.815 |
8.05kgs |
Spigot Adapter Clamp
The Spigot Adapter Clamp was designed to connent Ringlock Standards along the length of Tubular Ledgers, Truss Ledgers, and Girders.
It is also well known as scaffold spigot adaptor, ringlock support spigot clamp.
Ringlock lattice girders can create openings in the scaffold for bridging purposes.
| DESCRIPTION |
PART NO. |
EFF. DIMENSION (M) |
WEIGHT (KGS) |
| 4.26 M LATTICE GIRDER |
HSR540 |
|
68.72 |
| 5.18 M LATTICE GIRDER |
HSR550 |
|
73.2 |
| 6.39 M LATTICE GIRDER |
HSR560 |
|
91.57 |
| 8.52 M LATTICE GIRDER |
HSR580 |
|
114.77 |
Steel Plank is also well known as steel boards, metal planks, steel scaffold planks and galvanized steel planks etc . Metal planks have fire prevention, prevent many sands, light weight, corrosion resistance and durable.
When metal scaffold boards are used, the steel pipe used to build scaffolding can be appropriately reduced and the efficiency of construction can be improved.
| Code |
Description |
Length |
Surface treatment |
| HSSP |
Galvanized Steel Plank (240*45*1.2mm) |
as you |
Galvanized |
| HSSP |
Galvanized Steel Plank (225*38*1.5mm) |
|
Galvanized |
| HSSP |
Galvanized Steel Plank (320*76*1.6mm) |
|
Galvanized |
Installation Instructions
Test
Founded in 1992, HS Scaffolding is one of the market learders for the supply of System Scaffolding, Steel Boards, Stair Tower, Aluminium Stairtower and Extrusions, as well as Scaffolding ancillary components .Factory is strategically located just 1.5 hours from Shanghai, making transportation extremely convenient. This geographical advantage ensures that our logistics and delivery are highly efficient, enabling swift delivery of products to our customers.
All HS Scaffolding products are designed, developed and manufactured in HS Scaffolding own facilities to guarantee the very best build quality,all the products we supplied are of the highest quality and comply fully with all relevant stanards .The sales and engineering/design division have a wealth of knowledge stretching across the industrial sectors,this combined with our very experienced manufacturing stuffs, allowing us to meet diverse customer needs and offer innovative solutions.. Buy a HS Scaffolding products and you are investing in the future of your company and investing in the safety of your employees.
The factory is equipped with 12 advanced robotic welding production lines and various automated equipment. The use of these technologies not only enhances production efficiency but also ensures product consistency and reliability.
HS Scaffolding commitment to excellence is reflected in the quality of our products and also in the enthusiasm and experience of our staff . We listen to the feedback you provide us with,this gives us the opportunity to constantly improve on our products and services . At HS Scaffolding the customers always come first, our team is highly trained and knowledgeable about all products we supply and can provide comprehensive prices, assistance and technical expertise on any project.
1.What about after service ?
Our all products are fully tested before despatch, and we have traceability system. Please contact our after-service team once you have any product problem with some photos and videos to help us analyze them. We can make new ones to replace or reasonable compensation on both agreement.
2.What are the payment terms you can accept ?
T/T and L/C, others are negotiable.
3.What is your MOQ ?
Normally we accept one full container, but for special products we are happy to communicate with customer about order quantity.
4.Can we customize our company logo or name on products?
Yes, we can make permanent logo or sticker on products as the requirement from the customer.
5.How fast can you finish the order ?
HS company always figures out a schedule that meets the customer needs once the order is confirmed. And all production plan will be worked out as schedule.
6.Are you able to provide engineered drawings if needed ?
Yes, HS company has professional engineers who are capable of designing the most challenging scaffolding access solutions.
Audited Supplier 
){kind=link}